Simple Pump Support Center
Everything you need to install, maintain, and get the most from your Simple Pump system
Browse Support Articles
Technical Support
Can I add a Simple Pump motor later to the hand pump?
Yes, you can easily add a Simple Pump motor to your existing hand pump. The modular pump heads allow quick switching in just minutes.
Can I drive the Simple Pump motor with wind power?
Using the Simple Pump with wind power is not supported and will void the warranty.
Can I Install onto an Existing Mark II/III/VLOM or AFRIDEV Pedestal?
Install Simple Pump on existing Mark II/III/VLOM or AFRIDEV pedestals easily with our adaptor, minimizing cost and disruption. Adjustable height for seamless integration.
Can I run the Simple Pump motor on AC power?
Run the Simple Pump motor on AC by charging batteries first, ensuring efficient power use and backup during outages. Easily switch to hand-operation for convenience.
Can I use the Simple Pump with my low yield well?
Ensure optimal use of Simple Pump with low yield wells by placing it deeper below the water surface. Avoid warranty issues by stopping if water flow ceases.
Can the pump really develop enough pressure to fill my pressure tank?
The Simple Pump efficiently fills residential pressure tanks up to 45 psi, thanks to its precise manufacturing, ensuring reliable performance in most wells.
Can the Simple Pump be installed alongside my working submersible?
Install a Simple Pump alongside your submersible for a reliable backup. Access well water during power outages or when pumps stop working.
Can the Simple Pump be installed in a 2-inch Casing?
Yes, the Simple Pump deep well hand pump can be installed in a 2-inch casing. Follow special installation guidelines for optimal performance and secure mounting.
Can the Simple Pump be installed on my 7″ diameter casing?
Discover if the Simple Pump fits your 7" casing. Standard 7" ID casings have a 7.625" OD. If it's 7" OD, the ID is 6.25". We offer well caps for both sizes.
Can the Simple Pump be installed on my buried tank?
Install the Simple Pump on your underground tank with ease. Our pump anchors to a vertical well casing, ensuring efficient water access from tank to surface.
Can the Simple Pump hand pump water into my pressure tank?
Yes, the Simple Pump deep well hand pump can pump water into your home's pressure tank, even from a deep well, using its strength and precision engineering.
Can the Simple Pump motors be used with solar power?
Simple Pump motors are solar-compatible, using minimal power. With just 1-2 panels and batteries, enjoy reliable, all-day operation even in low sunlight.
Can the Simple Pump work if I only have a little water in my well?
The Simple Pump can work in wells with limited water, but a small buffer and low recovery rate require careful planning. Verify water levels and recovery rates before installation.
Can the Simple Pump work with my existing pipes and pitless?
Yes, the Simple Pump works with your existing pipes and pitless adapter. It installs alongside your submersible pump using a special adapter for seamless integration.
Do we need a check valve for irrigation?
Ensure efficient irrigation with a check valve. Essential for systems with pressure tanks or when pumping to elevated tanks. Prevents backflow and maintains water pressure.
Does a Simple Pump fit in a 4” Well with a Submersible and Pitless Adaptor?
A Simple Pump can fit in a 4" well with a pitless adapter, though maneuvering or replacing the adapter with a slimmer version may be necessary for installation.
Glossary: Well, Well Pump, and Simple Pump Terms
Understand key well and Simple Pump terms with our comprehensive glossary, from static water level to drop pipe and pump cylinder, making installation and maintenance easier.
How can I Find Out My Well Specifications or Measure My Well?
Discover how to locate and measure your well specifications for a reliable Simple Pump system. Learn where to find your well report, how to measure water depth, and get professional assistance if needed. Ensure your pump meets your water needs!
How can I measure my casing diameter if I can't remove the cap?
To measure your casing diameter, use a cloth tape to measure the circumference just below the well cap. Send us the measurement in your quote request.
How deep can a hand well pump from?
The Simple Pump excels in deep well hand pumping, reaching depths of 325 feet, surpassing competitors. Its lever arm design ensures ease of use, requiring minimal force even at maximum depth. Ideal for manual or motorized pumping, it adapts to various configurations, making it a versatile choice for deep well water access.
How deep can Simple Pump pump from?
The Simple Pump can hand pump from 325 feet and motor pump from 225 feet, with adjusted limits when pumping into pressurized systems or uphill.
How Do I Find the Water Level and Well Depth?
Find your well's water level and depth on your well report. If unavailable, request a copy from your state or county, or measure yourself with caution to avoid tangling the submersible wiring.
How does the Simple Pump Solar Compare to Other Solar Pumps?
The Simple Pump Solar stands out with top-quality materials, reliable design, and easy installation. High-efficiency solar panels ensure performance even in low light.
How much water does the Simple Pump pump?
Discover the Simple Pump's efficiency: delivers 4.5, 8.5, or 20.5 ounces per stroke. Choose the right cylinder for optimal water output.
How to Adjust the Simple Pump to Periscope Position
Adjust the Simple Pump to Periscope Position with care. Follow detailed instructions, use a helper, and manage the system's weight. Full steps available on our site.
How well does the pump work in freezing temperatures?
The Simple Pump works in freezing temperatures with freeze-proofing options: a weep hole to lower water level or a pitless adaptor for underground piping.
I have a hand dug well, how do I mount the Simple Pump?
The Simple Pump can be mounted on hand-dug wells using a well adapter plate that bolts to concrete, metal, or wood covers. Explore our well adapter mounting plate.
Is an electromagnetic pulse (EMP) a risk for the motors?
Explore EMP-resistant motors: simple units with no control circuitry and advanced assemblies with high-quality protection. Safe and reliable solutions.
Is there room in my 4” well with a submersible with pitless?
Installing a Simple Pump in a 4" well with a pitless is possible, though rare. Maneuvering or a slimmer pitless adapter may be needed for success.
My well has a bumpout on the cap, will the boshart cap work for this setup?
Yes, the Boshart well cap works with bump-out setups. Wiring exits through the bump-out, and the Simple Pump installs on top. Explore custom well caps on our site.
Recommended Use and Configuration of the Simple Pump Motors
Recommended for single-family use, the solar-powered Simple Pump system offers reliable water delivery into an ambient tank, ideal for homes, gardens, and light industrial needs.
Should I tie into my existing pitless or pump out of the well cap?
Should you tie into the pitless adapter or pump out of the well cap? It depends on your location, needs, and budget. Exiting through the well cap is easier, while a pitless adapter requires more work but offers more flexibility.
Simple Pump Cylinder Specifications
Optimize your well with Simple Pump Cylinders, designed for deep well hand pumps and ideal for static water levels. Reliable, efficient, and durable solutions.
Simple Pump Industrial and Environmental Pump Applications
Simple Pump offers reliable hand and motor-operated water pumps for industrial and environmental applications. Ideal for contaminated water, desalinization, and well monitoring.
Simple Pump Maximum Depth Specifications - Complete Technical Guide
Comprehensive depth specifications for Simple Pump systems from 25+ years manufacturing experience. Expert guidance on maximum pumping depths, Total Head calculations, pumping effort, and performance at various depths with competitive analysis.
Simple Pump Motor Power Requirements
Optimize your pumping system with our efficient Linear Bearing Link Drive Pump Motor, available in 12VDC and 24VDC options, offering low average draw and peak performance.
Simple Pump Pressure Tank Compatibility - Complete Expert Guide & Customer Validation
Comprehensive pressure tank compatibility guide from 25+ years manufacturing experience. Expert guidance on 45 PSI capability, connection methods, Total Head calculations, and real customer success stories with detailed validation.
Simple Pump Product Specifications
Simple Pump hand well pump, 325 feet: NSF-certified lead-free stainless steel, minimal wear points. Well caps from 2″ to 8″. Motor pumps up to 225′ depth with 12v/24v power.
Simple Pump Technical Support & Troubleshooting Guide
Get expert help diagnosing Simple Pump issues, checking compatibility, and resolving no-water, hard-pumping, pressure, and performance problems. Includes step-by-step troubleshooting, maintenance tips, and when to contact technical support.
Simple Pump Well Compatibility Chart
Check if your well is compatible with Simple Pump. See casing size, well depth, and submersible pump compatibility charts for 2–8 inch wells with or without existing electric pumps.
What is blocking the Simple Pump drop pipe in my well?
In some cases, torque arrestors or center guides may block the Simple Pump drop pipe in your well. Consult a qualified pump installer to remove unnecessary guides.
What size well does the Simple Pump fit in?
The Simple Pump fits in 2" ID wells as a stand-alone and can be installed in most 4" or larger wells alongside a submersible pump.
Will the Simple Pump drop pipes install in my pump house?
Simple Pump drop pipes are rigid and not flexible. For shorter spaces, opt for half-length pipes or modify your roof. Ideal for well installations.
Will the Simple Pump motor be damaged if I pump air?
Yes, pumping air can damage the Simple Pump motor seals and piston. Stop pumping if water stops flowing and allow the well to refill to avoid damage.
Documents & Manuals
Complete Document Library
Access all installation manuals, maintenance guides, brochures, and technical documentation
Need Personal Assistance?
Our technical support team is here to help with installation, troubleshooting, and parts questions.
Phone Support
Talk to our experts directly
Ext. 6: Technical Support
Ext. 4: Parts & Orders
Ext. 2: General Information
Email Support
Get detailed written responses
• Technical questions
• Parts requests
• Installation guidance
Local Installer
Find professional help nearby
• Professional installation
• Local support
• Warranty service
Ready to Get Your Simple Pump?
Now that you understand the support available, take the next step toward water security for your family.