Yes, Simple Pump can be installed in a pump house, though there are important considerations for this configuration.
Pump House Installation Overview
A pump house (or well house) is an enclosed structure built over a well. Installing Simple Pump in this environment is possible with proper planning.
Key Considerations
Ceiling Height
The pump handle needs room to operate:
- 24" lever arm: Requires approximately 4+ feet clearance above pump head
- 36" lever arm: Requires approximately 5+ feet clearance
- Consider full handle arc when planning
Access for Operation
- Comfortable standing position
- Room to pump without obstruction
- Clear path to pump location
Ventilation
If using motor:
- Adequate air circulation
- Heat dissipation
- Battery ventilation if applicable
Drop Pipe Installation
Standard Installation
Drop pipes lower into well from pump house floor:
- Works like standard installation
- Well casing accessible from inside pump house
- Same components used
Clearance Needs
- Room to handle drop pipe sections
- Assembly area for connections
- Access for maintenance
Motor Considerations in Pump Houses
Power Access
- Electrical outlet for battery charger
- Solar panel mounting nearby
- Wire routing to motor
Heat Management
- Motors generate heat during operation
- Enclosed space may need ventilation
- Avoid excessive temperatures
Weather Protection
Pump houses typically provide:
- Rain and snow protection
- Some temperature moderation
- Security for equipment
Installation Tips
For Hand Pump
- Verify ceiling height for lever arm
- Plan operating position
- Ensure lighting for use
- Consider lock for security
For Motorized
- Plan electrical connections
- Ensure adequate ventilation
- Consider noise in enclosed space
- Battery storage location
Advantages of Pump House Installation
Protection
- Weather protection for equipment
- Security from tampering
- Reduced UV exposure
Convenience
- Sheltered pumping area
- Storage for accessories
- Year-round access
Maintenance
- Easy access to pump head
- Dry working environment
- Tool and parts storage
Disadvantages to Consider
Space Limitations
- May restrict equipment options
- Limits handle length choices
- Constrains installation/maintenance
Ventilation
- Enclosed space requires planning
- Motor heat management needed
- Battery gas concerns
Alternative: Outdoor Installation
If pump house is constraining:
- Standard outdoor installation
- Weatherproof motor covers available
- Pump house for other equipment only
Making It Work
Most pump houses can accommodate Simple Pump with:
- Adequate ceiling height
- Proper ventilation planning
- Thoughtful equipment layout