Many customers successfully install Simple Pump themselves. This comprehensive guide helps you determine if DIY installation is right for you and what to expect.
Is DIY Installation Right for You?
DIY is Appropriate When
✅ Well depth under 135 feet - Manageable weight ✅ Physical capability present - Can handle components ✅ Helper available - Required for safety ✅ Basic mechanical aptitude - Comfortable with instructions ✅ Time to do it right - Not rushing the process
Professional Installation Recommended When
❌ Deep wells (135+ feet) - Significant weight ❌ Complex configurations - Pitless tie-in, dual pump ❌ Physical limitations - Can't handle weight/bending ❌ No helper available - Safety requirement ❌ Prefer professional assurance - Peace of mind
Critical Safety Requirements
Homeowners MUST have a helper when uninstalling or installing any Simple Pump. This is a safety requirement from our installation manual, not a suggestion.
Why a Helper is Required
- One person lowers/raises components
- One person feeds/receives drop pipes
- Prevents dropping components
- Assists if problems occur
Additional Safety
- Read entire manual before starting
- Disconnect any well power
- Work in daylight or good lighting
- Take breaks as needed
Weight Considerations
Assembly Weight by Depth
| Depth | Approximate Weight |
|---|---|
| 50 ft | ~30 lbs |
| 100 ft | ~50 lbs |
| 135 ft | ~75 lbs |
| 200 ft | ~100+ lbs |
The 135-Foot Guideline
At 135 feet, assembly weight reaches approximately 75 lbs. Beyond this:
- Consider professional installation
- Multiple helpers may be needed
- Lifting technique critical
What's Included for Installation
With Your System
- All necessary components
- Detailed installation manual
- Teflon tape (provided)
- Component instructions
What You'll Need
- T-Handle Installation Tool (included or available)
- Basic hand tools
- Ladder or platform for pump head access
- Measuring tape
Installation Overview
Basic Steps
- Prepare well - Remove cap, assess condition
- Assemble drop pipes - Connect with Teflon tape
- Attach cylinder - Bottom of assembly
- Lower assembly - Carefully into well
- Install well cap - Secure pump head
- Test operation - Verify pumping
Time Estimate
Plan for 2-4 hours depending on:
- Well depth
- Your experience
- Configuration complexity
- Whether issues arise
Installation Resources
Video Tutorials
We provide comprehensive installation videos:
- Overview of complete process
- Component assembly details
- Common scenarios addressed
- Troubleshooting guidance
Installation Manual
Step-by-step written instructions:
- Component identification
- Assembly procedures
- Safety warnings (marked ***)
- Troubleshooting section
Technical Support
Available during your installation:
- Phone support for questions
- Help with unexpected issues
- Guidance on procedures
Technical Support: 877-492-8711 ext. 6
Common DIY Challenges
Alignment
- Keep assembly straight going down
- Rotate if encountering resistance
- Don't force past obstructions
Connections
- Proper Teflon tape application (3-5 wraps max)
- Hand-tight plus 1-2 turns
- Never use liquid sealant
Weight Management
- Use smooth, controlled movements
- Rest between sections if needed
- Never rush the process
Tips from Successful DIYers
- Watch all videos first - Understand full process
- Organize components - Layout before starting
- Take your time - Quality over speed
- Communicate with helper - Coordinate movements
- Stop if uncertain - Call support
When to Call for Help
Don't hesitate to contact us if:
- Unexpected obstruction in well
- Components don't fit as expected
- Questions about procedure
- Something seems wrong
It's better to ask than to create problems.
Professional Installation Option
If you prefer professional installation:
- Find a Dealer in your area
- Many dealers offer installation services
- Some well service companies install Simple Pump
- We can provide installer references
Ready to Install?
Order your system and plan your installation:
- Review all materials upon receipt
- Watch installation videos
- Schedule time with helper
- Have support number handy
Technical Support: 877-492-8711 ext. 6