Yes, the Simple Pump can work with your existing pitless adapter and underground piping. This allows you to share infrastructure with your submersible pump and deliver water directly into your home's plumbing system.
How Pitless Integration Works
The Pitless Adapter
A pitless adapter is a fitting installed below the frost line that allows water to exit the well casing horizontally and travel underground to your home. Your existing submersible pump connects to this adapter.
Simple Pump Connection
The Simple Pump can tap into the same pitless adapter using our pitless adapter kit, allowing both pumps to share the underground piping.
Configuration Options
Option 1: Dedicated Simple Pump Pitless
Install a second pitless adapter for the Simple Pump:
- Complete separation from submersible
- Independent operation
- No interference between systems
- Requires additional underground piping
Option 2: Shared Pitless (Most Common)
Use our pitless adapter kit to connect to existing adapter:
- Shares underground piping with submersible
- Delivers to same pressure tank
- Check valves prevent backflow
- Most economical option
Pitless Adapter Kit Components
Our kit includes:
- Drop pipe connection fitting
- Check valve assembly
- Stainless steel components
- Required seals and hardware
- Installation instructions
Well Clearance Requirements
To install Simple Pump with a pitless and submersible:
| Casing Size | Clearance | Compatibility |
|---|---|---|
| 4" | Tight fit | Requires verification |
| 5" | Good clearance | Compatible |
| 6"+ | Ample room | Fully compatible |
Four-inch wells require careful measurement. The Simple Pump drop pipe (1" Schedule 80 PVC) plus submersible pipe and wiring must fit together. Contact us with your submersible specifications for compatibility verification.
Benefits of Pitless Installation
Freeze Protection
- Water line below frost line
- No exposed outdoor piping
- Year-round operation
Convenience
- Water delivered inside home
- No hauling buckets
- Works with existing fixtures
Pressure Capability
- Fills pressure tank directly
- Maintains household pressure
- Seamless backup operation
Alternative: Pumping Out of Well Cap
If pitless installation isn't suitable:
- Pump exits through machined well cap
- Manual carry to point of use
- Simpler installation
- Lower cost
Installation Considerations
Professional Assessment
Consider professional assessment for pitless installations:
- Verify submersible clearance
- Check pitless adapter compatibility
- Ensure proper check valve placement
- Confirm pressure system compatibility
DIY Installation
Experienced homeowners can install with our detailed instructions. A helper is required for safety.