Yes, Simple Pump can be installed on underground tanks (cisterns) using a vertical well casing configuration.
How It Works
For buried tank installations:
- Vertical casing extends from tank to surface
- Simple Pump mounts on casing at ground level
- Drop pipes reach down into tank water
- Pump operates just like a well installation
Requirements for Tank Installation
Tank Access
- Vertical access pipe (casing) from surface to tank
- Casing must be of compatible diameter
- Secure mounting point at surface
Casing Specifications
- Standard well casing sizes work (2" to 8"+)
- Schedule 80 PVC or steel
- Properly secured to tank
Water Depth
- Sufficient water depth for cylinder submergence
- Minimum 3-4 feet of water above cylinder
- Account for water level variation
Common Tank Applications
Simple Pump on buried tanks is used for:
- Rainwater collection - Pump from underground cisterns
- Spring collection - Buried spring boxes
- Storage tanks - Emergency water reserves
- Agricultural - Livestock water from buried tanks
Installation Considerations
Casing Installation
If no casing exists:
- Install vertical casing into tank
- Seal penetration properly
- Ensure structural integrity
Freeze Protection
For cold climates:
- Top drop pipe kit with weep hole
- Allows water to drain back below frost line
- Prevents freezing in pump head
Sizing Your System
To configure for your tank:
- Tank depth - Distance from ground to tank bottom
- Water depth - Normal water level in tank
- Casing diameter - Size of access pipe
- Daily water needs - Volume you'll pump
Alternative: Shallow Well Suction Pump
If your water level is within 25 feet of surface:
- Shallow Well Suction Pump may be appropriate
- Can be located away from tank
- Pulls water through horizontal piping