Yes, Simple Pump can be installed in a 2-inch well casing with our dedicated 2" Well Cap Assembly.
2-Inch Well Configuration
For 2-inch wells:
- Stand-alone installation - Simple Pump only (no room for submersible)
- All standard components fit - Drop pipes, cylinder, pump head
- Full depth capability - Same 325 ft maximum as larger casings
What Fits in a 2" Casing
| Component | Fits in 2"? |
|---|---|
| 1" Schedule 80 drop pipe | ✅ Yes |
| Pump cylinder (all models) | ✅ Yes |
| Pump rod | ✅ Yes |
| Submersible pump | ❌ No room |
2" Well Cap Assembly
Our 2" Well Cap Assembly is specifically designed for:
- 2-inch inside diameter casings
- Proper sealing around pump rod
- Simple Pump mounting
- Weather and debris protection
Installation Considerations
For 2-inch wells:
- Precise alignment - Less tolerance for misalignment
- Careful insertion - Take time lowering components
- Professional recommended - Consider professional installation
Measuring Your 2" Casing
To confirm 2-inch casing:
- Measure inside diameter - Should be approximately 2"
- Verify PVC or steel - Both are compatible
- Check condition - Ensure casing is in good condition
When 2" Installation is Ideal
2-inch wells are often found in:
- Older drilled wells
- Hand-dug wells with casing
- Shallow domestic wells
- Agricultural monitoring wells
Quote Information Needed
For a 2-inch well quote, provide:
- Confirmation of casing diameter
- Static water level
- Total well depth
- Casing material (PVC or steel)