Simple Pump Co., LLC

Alternate seal replacement kit for the Model 125 Simple Pump cylinder and pump head. Restores original performance and prevents water leakage.

Seal replacement kit for the Simple Pump 100CA pump cylinder and pump head. Restores proper sealing and maintains smooth pump operation.

Seal replacement kit for the Simple Pump 200CA pump cylinder and pump head. Restores optimal performance and prevents water leakage.

Replacement parts kit for the Simple Pump heavy-duty handle assembly. Includes critical wear components to restore reliable operation and smooth performance.

Cap and brush replacement for 12V or 24V RAE gear motors. (Qty 2)

Seal replacement kit for the Simple Pump 125CA pump cylinder and pump head. Restores optimal performance and prevents water leakage.

Replacement parts kit for the Simple Pump standard handle assembly. Includes critical wear components to restore reliable operation and smooth performance.

Heavy-Duty 24" lever-arm assembly designed for high-cycle or commercial use. Incorporates stainless roller bearings at all pivot points.

24" lever-arm pump handle with graphite-impregnated bronze bushings for smooth operation and reduced friction.

36" lever-arm pump handle. Graphite-impregnated bronze bushings at pivot points. Reduces pumping effort by ~50% for deeper water levels.

Heavy-Duty 36" lever-arm assembly with stainless roller bearings for extreme-duty or high-cycle applications.

Pump Head Assembly for standard-height casings (12" or more above ground). Three connection options: ¾" hose adapter, ¾" FNPT, and 90° stainless street elbow.

Same as PHA-2 but double-height for lower casing (11" above to 12" below ground). Includes three connection options (¾" hose, ¾" FNPT, 90° stainless street elbow).

Pump Head Assembly for HD Handle or DC Drive for standard-height casing. Same connections as PHA-2 without the standard handle assembly and hardware.

Same as PHA-2-ME/GM but double-height for lower casing (11" above to 12" below ground). Same connections as PHA-47 without the standard handle assembly and hardware.

Suction Pump Head Assembly with 125 piston. Standard-height casing. Three connection options: ¾" hose, ¾" FNPT, and 90° SS street elbow. Output: 8.5 oz per full stroke.

Same as PHA-2-S-25 but double-height for lower casing (11" above to 12" below ground). Suction Pump Head Assembly with 125 piston. Output: 8.5 oz per full stroke.

Bushing for Simple Pump machined well caps to adjust the submersible port from a 1 1/4” pipe opening to a 1” pipe.

Simple Pump's 2" well cap. One 1¾" port with split flange for Simple Pump; CNC-machined from solid billet aluminum.

Simple Pump's 8" well cap with four ports for pump, electrical, submersible, and auxiliary connections. CNC-machined from solid billet aluminum. (Submersible pump pipe through cap design)

Simple Pump's 3" well cap. One 1¾" port with split flange for Simple Pump; CNC-machined from solid billet.

Simple Pump's 4″ Well Cap Assembly fits well casings with a 4-inch inner diameter. Use this cap when a submersible pump pipe exits the top of the casing alongside your Simple Pump hand pump. Not sure of your casing size? Measure the inner diameter of the casing, or contact Simple Pump and we'll help you choose.

Simple Pump's 4.5″ Well Cap Assembly fits well casings with a 4.5-inch inner diameter. Choose this cap when a submersible pump pipe runs out the top of the casing next to your Simple Pump hand pump. To confirm your size, measure the inner diameter of your casing, or reach out to Simple Pump for help.

Simple Pump's 5" well cap with four ports for pump, electrical, submersible, and auxiliary connections. CNC-machined from solid billet aluminum. (Submersible pump pipe through cap design)

Simple Pump's 6"-6.25” well cap with four ports for pump, electrical, submersible, and auxiliary connections. CNC-machined from solid billet aluminum. (Submersible pump pipe through cap design)

Simple Pump's 6"-6.25” w/4” liner well cap with four ports for pump, electrical, submersible, and auxiliary connections. CNC-machined from solid billet aluminum. (Submersible pump pipe through cap design)

Split flange with hardware to mount Simple Pump to an existing well cap or SIM082 mounting plate. Includes O-ring seal.

Simple Pump's 5.5" well cap with four ports for pump, electrical, submersible, and auxiliary connections. CNC-machined from solid billet aluminum. (Submersible pump pipe through cap design)

Mounting plate with split flange for installing Simple Pump on dug well, cistern, or tank.

Pedestal adaptor to install a Simple Pump on a concrete, metal, or wood cover of a hand-dug well, cistern, or tank. Accommodates a submersible pipe if required.

Simple Pump's 6"-6.25” w/2.375” sub port well cap with four ports for pump, electrical, submersible, and auxiliary connections. CNC-machined from solid billet aluminum. (Submersible pump pipe through cap design)

5" Boshart cast-iron well cap for use with submersible pitless-adapter configuration. With three ports for pump, electrical, and auxiliary connections.

5.5" Boshart cast-iron well cap for use with submersible pitless adapter configuration. With three ports for pump, electrical, and auxiliary connections.

6" Boshart cast-iron well cap for use with submersible pitless-adapter configuration. With three ports for pump, electrical, and auxiliary connections.

6.25" Boshart cast-iron well cap for use with submersible pitless-adapter configuration. With three ports for pump, electrical, and auxiliary connections.

105” drop pipe kit: 1” PVC drop pipe, stainless-steel coupler, lift rod with 304 SS rod ends, and rod guide. User-specified 1⁄16″ weep hole from 1″–96″.

105” drop pipe kit: 1” PVC drop pipe, stainless-steel coupler, lift rod with 304 SS rod ends, and rod guide. 1⁄16″ weep hole at 48″.

54” drop pipe kit: 1” PVC drop pipe, stainless-steel coupler, lift rod with 304 SS rod ends, and rod guide. Standard 1⁄16″ weep hole at 48″.

105” drop pipe kit: 1” PVC drop pipe, stainless-steel coupler, lift rod with 304 SS rod ends, and rod guide. No weep hole.

54” drop pipe kit: 1” PVC drop pipe, stainless-steel coupler, lift rod with 304 SS rod ends, and rod guide. No weep hole.

27” drop pipe kit: 1” PVC drop pipe, stainless-steel coupler, lift rod with 304 SS rod ends, and rod guide. No weep hole.

Simple Pump’s deepest lifting pump cylinder. Pumps up to 4.5 oz per stroke with a maximum lift of 325 feet.

Simple Pump’s mid-range capacity cylinder. Pumps up to 8.5 oz per stroke with a maximum lift of 225 feet.

Simple Pump’s largest capacity cylinder. Pumps up to 20 oz per stroke with a maximum lift of 110 feet. Designed for high-volume shallow to mid-depth wells.

Simple Pump's Inline Dual-Pump Valve Assembly is the valve component that makes inline dual-pump well operation possible — connect any compatible WORKHORSE solar submersible to your Simple Pump, no manual switching required. WORKHORSE solar submersibles sold separately.

Simple Pump's Inline Dual-Pump Valve Assembly is the valve component that makes inline dual-pump well operation possible — connect any compatible WORKHORSE solar submersible to your Simple Pump, no manual switching required. WORKHORSE solar submersibles sold separately.

Add a 2" solar submersible to your existing Simple Pump 100CA well with no manual switching. This kit includes the Simple Pump inline dual-pump valve and the matching cylinder adapter. Solar submersible sold separately.

Add a 2" solar submersible to your existing Simple Pump 125CA well with no manual switching. This kit includes the Simple Pump inline dual-pump valve and the matching cylinder adapter. Solar submersible sold separately.

Add a 2" solar submersible to your existing Simple Pump 125CA well with no manual switching. This kit includes the Simple Pump inline dual-pump valve and the matching cylinder adapter. Solar submersible sold separately.

Add a 2" solar submersible to your existing Simple Pump 200CA well with no manual switching. This kit includes the Simple Pump inline dual-pump valve and the matching cylinder adapter. Solar submersible sold separately.

Add a 3" solar submersible to your existing Simple Pump 125CA well with no manual switching. This kit includes the Simple Pump inline dual-pump valve and the matching cylinder adapter. Solar submersible sold separately.

Add a 3" solar submersible to your existing Simple Pump 125CA well with no manual switching. This kit includes the Simple Pump inline dual-pump valve and the matching cylinder adapter. Solar submersible sold separately.

Add a 3" solar submersible to your existing Simple Pump 200CA well with no manual switching. This kit includes the Simple Pump inline dual-pump valve and the matching cylinder adapter. Solar submersible sold separately.

Machined PVC tool designed to simplify removal and reinstallation of the Simple Pump handle. Reduces strain on the bracket and uses water weight for easier disassembly.

Machined from a solid billet of aluminum. Holds each drop pipe securely during installation to prevent the pump from falling into the well.

PVC T-handle tool for lifting 8-15 drop pipe kits (72-149 ft). Designed for deep well installations requiring extra leverage and control.

Galvanized steel T-handle tool for lifting 16 or more drop pipe kits (150 ft+). Designed for deep well installations requiring extra leverage and control.

Display stand for showcasing the Simple Pump hand pump. Includes aluminum frame, faux well casing, and cutaway view. Pump components sold separately.

Frost-proof pitless adaptor for connecting the Simple Pump to underground plumbing. Creates a sealed, hygienic barrier between the well and your water system.

Factory-set pressure switch for operating a DC powered Simple Pump with a pressure tank. Turns on at 20 psi and off at 40 psi for automatic water flow control.

Factory-set pressure switch for DC powered Simple Pump systems. Turns pump on at 30 psi and off at 50 psi for automatic water pressure control.

6” SDR26 PVC well casing sleeve, 5’ in length. Adds structural strength to existing well casing and reinforces the casing opening.

One-way check valve with pressure gauge for connecting the Simple Pump to a pressure tank or uphill plumbing. Includes air port for freeze protection.