Simple Pump Pricing: Hand Pump and Motors:
for sub-assemblies and accessories
1. PUMP HEAD ASSEMBLY (one of these)
| Image | Item | Description | Cost |
 |
PHA2 | Pump Head Assembly, includes lever link and bracket. For use with 24″ and 36″ lever arms. | $575 |
| PHA2-47 | PHA, but with double-height riser tube and pump rod. For short casings, or casings just below grade. | $675 | |
| PHA2-ME/GM | Pump Head Assembly, without lever link and bracket. For motor-only application or with 36LAHD below. | $460 | |
| PHA47-2-ME/GM | Double-height Pump Head Assembly, without lever link and bracket. For motor-only application or with 36LAHD below. | $560 | |
| For all pump heads: There are three connection options: 3/4” hose, NPT, and 90-degree spout. (Use specific drinking water compatible hose.) |
2. POWER (hand or motor)
 |
24LA | 24″ Lever Arm Assembly with ABS grip, bronze bushings | $72.50 |
| 36LA | 36″ Lever Arm Assembly with ABS grip, bronze bushings | $95 | |
 |
36LAHD | Heavy-duty 36″ Lever Arm Assemby with ABS grip and roller bearings at pivot points. With heavy-duty clevis, link arm, bracket. For pump use by village. |
$440 |
 |
12v and 24v DC motor systems. Nine options for inside or outside use… from standalone motor unit to full solar pump system. | from $850 to $3200 |
3. WELL CAP
 |
C2-Assy | 2″ well cap. Plug and fasteners. 1-3/4″ split-flange port for the Simple Pump only. Machined from a solid metal billet of metal. | $72.50 |
 |
C4-Assy | 4″ well cap. Plugs and fasteners. Three ports: 1.75″ for the Simple Pump with split flange, 1.70″ smooth-walled port with slight taper having a press-fit plug for submersible, 1.00″ FNPT with threaded PVC plug, for wiring. Machined from solid metal billet. |
$85 |
 |
C4.5-Assy | 4.5″ well cap. Plugs and fasteners. Three ports: 1.75″ for the Simple Pump with split flange, 1.70″ smooth-walled port with slight taper having a press-fit plug for submersible, 1.00″ FNPT with threaded PVC plug, for wiring. Machined from solid metal billet. |
$85 |
 |
C5-Assy | 5″ well cap. Plugs and fasteners. Four ports: 1.75″ for the Simple Pump with split flange, 1.70″ smooth-walled port with slight taper having a press-fit plug for submersible, (2)-1.00″ FNPT with threaded PVC plugs, one for wiring, one for shock access or Well Watch monitor. Machined from solid metal billet. |
$85 |
 |
C6-6.25-Assy | 6/6.25″ well cap. For regular, thick-walled DR27.6 casing with ID of 6.25″ and OD of 6.9″. And for 6″ or 6.25″ ID and 6.625″ OD. With plugs and fasteners. Four ports: 1.75″ for the Simple Pump with split flange, 1.70″ smooth-walled port with slight taper having a press-fit plug for submersible, 1.00″ FNPT with threaded PVC plug, for wiring, 0.75″ FNPT with threaded PVC plug (for vent or other access). Machined from solid metal billet. |
$105 |
 |
C6.25/4-Assy | 6″/6.25″ well cap. Used when submersible exit is through well cap and there is a 4″ liner. Hole spacing is identical to the 4″ cap. Three ports: 1.75″ for the Simple Pump with split flange, 1.70″ smooth-walled port with slight taper having a press-fit plug for submersible, 1.00″ FNPT with threaded PVC plug, for wiring. Machined from solid metal billet. |
$115 |
 |
C8-Assy | 8″ well cap assembly. Plugs and fasteners. Four ports: 1.75″ for the Simple Pump with split flange, 1.70″ smooth-walled port with slight taper having a press-fit plug for submersible, (2)-1.00″ FNPT with threaded PVC plugs, one for wiring, one for shock access or Well Watch monitor. Machined from solid metal billet. |
$115 |
 |
C5WTCC-CI | 5″ Boshart cast iron well cap (5-5/8″ OD casings). Certified, gasketed, (2)-3/4″ screened vents, 1″ FNPT conduit connection in bump-out. With extra port for shock access or Well Watch monitor. For use with submersible pitless adaptor configuration. | $120 |
 |
C6WTCC-CI | 6″ Boshart cast iron well cap (for 6″ or 6.25″ ID casings with 6-5/8″ OD). Certified, gasketed, (2)-3/4″ screened vents, 1″ FNPT conduit connection in bump-out. With extra port for shock access or Well Watch monitor. For use with submersible pitless adaptor configuration. | $130 |
 |
C7WTCC-CI | 6.25″ Boshart cast iron well cap (6.9″-7″ OD casing). Certified, gasketed, (2)-3/4″ screened vents, 1-1/4″ FNPT conduit connection in bump-out. Can be ordered with extra port for shock access or Well Watch monitor. For use with submersible pitless adaptor configuration. | $140 |
4. DROP PIPE Kits (as appropriate for your well)
 |
109DPTSS48-KIT | 9′ top drop pipe kit with 1/16″ weep at 48 inches. With Stainless steel coupler, lift rod and rod guide. | $50 |
| 109DPTCSS-KIT | 9′ top drop pipe kit with 1/16″ weep at custom depth. With Stainless steel coupler, lift rod and rod guide. | $50 | |
| 109DPSS-KIT | 9′ drop pipe kit. With Stainless steel coupler, lift rod and rod guide. | $50 | |
| 54DPTSS48-KIT | 54″ drop pipe kit with 1/16″ weep at 48 inches. With Stainless steel coupler, lift rod and rod guide. | $45 | |
| 54DPSS-KIT | 54″ drop pipe kit. With Stainless steel coupler, lift rod and rod guide. | $45 | |
| 27DPSS-KIT | 27″ pipe kit. With Stainless steel coupler, lift rod and rod guide. | $40 |
5. PUMP CYLINDER
 |
125CA-82515 | Pump Cylinder Assembly, 8.5 oz per full stroke | $400 |
| 100CA | Pump Cylinder Assembly, 4.5 oz per full stroke | $330 | |
COMPLETE ACCESSIBLE ROTARY PUMP SYSTEM
 |
ADA100 | Available in limited quantities directly from Simple Pump Co. only. for USDA-FS and BLM Sold as a complete packaged system: crank input head, (10) lengths of nine foot drop pipe kits, pump cylinder, and a well cap in the required diameter. Sold only with the 100 pump cylinder. The ADA100 provides accessible operating parameters when the input force is no more than 5lbs. (static water level less than 80 feet). |
$2,495 |
ACCESSORIES
 |
WW660-5302 | Well Watch Water level measurement and monitoring – Purchase – One-time rental |
$399 $100 |
 |
SIM073 | Machined aluminum safety tool | $28 |
 |
SK125BU | (2) 90D buna u-cup seals for 3/4″ SS pump rod and (2) 90D urethane u-cup seals for the piston body. | $25 |
 |
SK125-82515 | (2) buna and (2) urethane u-cup seals for the piston body, (2) buna u-cup seals for the rod gland in the pump head. |
$30 |
| SK100BU | (1) buna and (2) urethane u-cup seals for the piston body, (2) buna u-cup seals for the rod gland in the pump head. |
$25 | |
 |
CV-1-Kit | Check valve, gauge, nipple and brass plug — for pumping into a pressure tank or uphill. With the bleeder valve, you can let air into the system, behind the valve, allowing water to drain out of the pump head in freezing weather. | $75 |
 |
TH-1Assy | T-Handle Installation Assist Tool | $12 |
 |
5684RE-SS | Rod extender: 3/8″ x 1-1/4″ stainless steel with 5/16-18 male and female threads. | $7 |
 |
PA-1 | Pitless adaptor assembly: For using the Simple Pump with its own pitless exit to an underground pipe. | $275 |
 |
PA1-MK | Alignment Adapter. If pitless is closer than 4′ from the casing rim. | $100 |
 |
SIM072Assy | Pedestal Adaptor: to install a Simple Pump on the concrete, metal or wood cover of a bored or hand-dug well. Used with 4″ well cap. | $100 |
 |
SIM082Assy | Mounting Plate with split flange: to install a Simple Pump on an existing pedestal of a decommissioned India Mk II/III, VLOM, Afridev. 7″ x 9″ x 1/2″ T6061 AL mounting plate, four mounting bolts with lock washers nuts and split flange kit with 224 o-ring. |
$115 |
 |
SS90STEL07 | 90-degree, stainless steel outlet elbow | $13.50 |
| 6x5Sleeve | 6″ x 5′ PVC casing. Reinforcement sleeve for 2″ casings and some 4″ ad 4.5″ casings. | $60 | |
| Viton® U-cup seal for chemical applications. | $6.50 | ||
 |
PL1 | Pump Lift. For well professionals. Human-powered crank input pump lift for installation and pulling of SimplePUMPS on 2″-8″ casings. Weighs 40lbs. Capable of lifting 325lbs. | $975 |
TURN LANDSCAPE FOR BEST VIEW
1. PUMP HEAD ASSEMBLY (one of these)
With three connection options: 3/4” hose, NPT, and 90-degree spout.
(Use drinking-water-compatible hose.)
| Item | Description | Cost |
| PHA2 | Pump Head Assembly. | $575 |
| PHA2-47 | Double-height Pump Head. | $675 |
| PHA2-ME/GM | Pump Head Assembly, for motor or 36LAHD. |
$460 |
| PHA47-2-ME/GM | Double-height Pump Head, for motor or 36LAHD. |
$560 |
2. POWER (hand or motor)
| 24LA | 24″ Lever Arm | $72.50 |
| 36LA | 36″ Lever Arm | $95 |
| 36LAHD | Heavy-duty 36″ Lever Arm. For pump use by village. |
$440 |
| 12v and 24v DC motor systems. | from $850 to $3200 |
3. WELL CAP
| C2-Assy | 2″ well cap. | $72.50 |
| C4-Assy | 4″ well cap. | $85 |
| C4.5-Assy | 4.5″ well cap. | $85 |
| C5-Assy | 5″ well cap. | $85 |
| C6-6.25-Assy | 6/6.25″ well cap. | $105 |
| C6.25/4-Assy | 6″/6.25″ well cap. When 4″ liner. | $115 |
| C8-Assy | 8″ well cap assembly. | $115 |
| C5WTCC-CI | 5″ Boshart pitless | $120 |
| C6WTCC-CI | 6″ Boshart pitless | $130 |
| C7WTCC-CI | 6.25″ Boshart pitless | $140 |
4. DROP PIPE Kits (as appropriate for your well)
| 109DPTSS48-KIT | 9′ top drop pipe/rod assy. | $50 |
| 109DPTCSS-KIT | 9′ top drop pipe/rod assy. | $50 |
| 109DPSS-KIT | 9′ drop pipe/rod assy. | $50 |
| 54DPTSS48-KIT | 54″ drop pipe/rod assy. | $45 |
| 54DPSS-KIT | 54″ drop pipe/rod assy. | $45 |
| 27DPSS-KIT | 27″ pipe/rod assy. | $40 |
5. PUMP CYLINDER
| 125CA-82515 | Pump Cylinder, 8.5oz/stroke | $400 |
| 100CA | Pump Cylinder, 4.5oz/stroke | $330 |
COMPLETE ACCESSIBLE ROTARY PUMP SYSTEM
| ADA100 | for USDA-FS and BLM | $2,495 |
ACCESSORIES
| WW660-5302 | Water level monitor – Purchase – One-time rental |
$399 $100 |
| SIM073 | Installation safety tool | $28 |
| SK125BU | Seal kit | $25 |
| SK125-82515 | Seal kit | $30 |
| SK100BU | Seal kit | $25 |
| CV-1-Kit | Check valve, gauge | $75 |
| TH-1Assy | Installation Assist Tool | $12 |
| 5684RE-SS | Rod extender | $7 |
| PA-1 | Pitless adaptor assy | $275 |
| PA1-MK | Adapter for pitless | $100 |
| SIM072Assy | Pedestal Adaptor | $100 |
| SIM082Assy | Mounting Plate | $115 |
| SS90STEL07 | 90-degree outlet elbow | $13.50 |
| 6x5Sleeve | 6″ x 5′ PVC reinforcement | $60 |
| Viton® U-cup seal | $6.50 | |
| PL1 | Pump Lift | $975 |