Measure and Monitor Your Own Water Level with Sound Waves
with WELL WATCH by Eno Scientific
No tape or string to get stuck.
No contamination issues.
Gives water level, quantity of water in well, drawdown and recovery rate.
Always know your water level.
You do NOT want to be surprised by suddenly running out of water.
Imagine trying to have your submersible lowered or your well deepened, when everyone within fifty miles needs exactly the same.
Water levels are dropping around the country — from a few feet to tens of feet to a hundred feet and more. Do you live in an area affected by increasing drought or fracking, or are you concerned about overuse in your community?
The Well Watch can give you peace of mind by providing you with the ability to monitor current, real time levels or trends in usage and level patterns. These units are the perfect accessory for the home or small commercial water well.
The Well Watch unit comes with the display unit, the probe, and the electrical adapter… ready to go.
Most Simple Pump well caps now have a port where the Well Watch can be installed. Just screw in.
The usual methods of monitoring water levels in your well were intrusive water tapes, bubblers or transducers. These methods open your well to contamination issues and tend to get stuck in the pump wiring resulting in an expensive, time consuming fix.
The Well Watch uses sound waves to non-invasively measure water levels. This makes monitoring your well quick, safe and inexpensive.
The alarm feature can be used to alert you to a low water level, preventing overuse or damage to the pump and alerting you to the possible need to lower your pump.
$399.00: Phone us, toll-free: 877.492.8711 ext 4.
– 110v AC power cord with transformer
– and custom power cable for off-grid application on 6v, 9v, 12v or 24v DC.
Or One-time Rental…
For initial water level reading to get a quote: $100.