How deep can a Simple Pump pump from?
Because of Simple Pump's lever arm design, materials and superior manufacture, the average person can comfortably pump from deep wells, from as for down as 325 feet static water level -- for the common configuration of hand-pumping up to ground level, at ambient pressure (e.g., into a bucket). This is much further down than any of our competitors.
The maximum for a particular well is determined by the combination of several factors, including whether pumping into a pressurized plumbing system, or using manual or motor to power. When using a Motor, the maximum supported depth also depends on the capacity of the pump cylinder used, and the voltage at which it is run. (We will also advise you on these parameters, when you submit your request for a quote.)
To explain some of these interlocking limits, we need to explain the concept of “TOTAL HEAD”.
"Total Head" equals:
Then, for either of these:
You can divide that maximum total height up any way you want
So you can hand-pump from a 325 foot static water level.
Or you can hand pump from 175 feet static water level, plus pump uphill for 50 feet vertical rise (five stories), plus into household plumbing (100 feet proxy equivalent to 45 psi pressure).
Or other combinations of water level, vertical rise and pressure -- as long as the total of these three factors is less than 325 feet.
Volume and Effort
Pumping rates from the Simple Pump vary directly with the frequency and length of strokes of the lever arm. In normal operation, Simple Pump delivers up to 5 gallons per minute. Pumping water from normal depths is easy. The actual force required is dependent on the static water level, not the total length of drop pipe assembly.
For a common installation, a well with a 100-foot static water level, it takes approximately 12 pounds of downward force using our 24” lever arm. A child can easily do this. Even at a static water level of 325 feet, it takes only approximately 16 pounds of downward force, using our 36” lever arm.