Simple Pump header: Logo and slogan - 'The Modern Water Well Pump'.

CSS Pop Up Menus Css3Menu.com

Installation Instructions for the MOTORIZED Simple Pump System
(Linear Bearing Link Drive option)
page 5

Remove the Pump Head


While holding the pump head by the riser tube, seat the safety tool securely on the split flange. Seat the safety tool on the split flange.
Then, slowly lower the bell end of the top drop pipe into the safety tool. Lower drop pipe onto safety tool.
Use a channel lock to remove the riser tube and pump head. This allows access to the 3/4" pump rod. 

Do not remove the nipple.

Remove riser tube.

next page





FOR A PUMP QUOTE SPECIFIC TO YOUR WELL, GO TO...

GET A QUOTE



DEALERSHIP QUERIES | SEND A QUESTION OR MESSAGE


SIMPLE PUMP COMPANY, LLC
1140 Amarillo Drive, Gardnerville, Nevada 89460-7504