Simple Pump header: Logo and slogan - 'The Modern Water Well Pump'.

CSS Pop Up Menus Css3Menu.com

Installation Instructions for the MOTORIZED Simple Pump System
(Linear Bearing Link Drive option)
page 4

Section 4: Installation

Starting with a fully-functional lever-arm pump, what follows are the step-by-step installation instructions.


Remove the lever arm mechanism:

Using the 3/16" Allen wrench, remove each of the four fasteners holding the lever arm mechanism to the pump head.
Close-up of Simple Pump head. Showing removal of lever arm bracket screws.
Remove the lever arm bracket and lever (they should still be connected) from the 3/4" stainless rod.

The direction you screw is the opposite of normal -- turn clockwise to remove, rather than the normal counterclockwise.
Removing lever arm itself.
Using the 3/16" Allen wrench, loosen the pinch bolt and the 3 mounting bolts on the split flange enough to pull the pump head (including riser tube) up out of the well. Raising pump head to prepare for next step.

Installation continued next page





FOR A PUMP QUOTE SPECIFIC TO YOUR WELL, GO TO...

GET A QUOTE



DEALERSHIP QUERIES | SEND A QUESTION OR MESSAGE


SIMPLE PUMP COMPANY, LLC
1140 Amarillo Drive, Gardnerville, Nevada 89460-7504