|
THE SIMPLE PUMP SYSTEM
By "pump system", we mean what you may think of as "the pump" -- the part you see above ground -- PLUS the just as important parts below ground needed to reach the water and bring it to the surface.
Our two core pump systems are the hand-operated 125L and 100L. The 125L gives up to 5 gallons per minute, and the 100L up to 3gpm. Each core system is configurable to best work for YOUR specifications.
Motorized operation can be added to the hand pump system at initial purchase, or at any time in the future. (Hand to motor to hand interchangability is a UNIQUE feature of the Simple Pump.)
A pump system is configured with a choice from each of the following five sections:
1. The pump head
2. The power input (hand-lever or motor, or both)
3. A well cap
4. Drop pipe kits (quantity as appropriate for your water level)
5. A pump cylinder.
Accessories that are also part of each order are a safety tool and replacement seal kit.
(The sections, 1 to 5 below, are in order corresponding to location once installed — from pump head at the top down to pump cylinder.)
|
|
|
1. PUMP HEAD
ASSEMBLY
(one of these) |
 |
PHA
|
Pump Head Assembly, includes lever link and bracket. For use with 24" and 36" lever arms. |
$500
|
|
PHA-ME/GM |
Pump Head Assembly for use with Motor only (105ME-GM-Assembly-7) No lever arm components. |
$400
|
|
|
PHA-47 and
PHA-ME/GM-47 |
As above, with double-height riser tube and pump rod: for specialized applications. |
$600
$500
|
|
|
|
|
|
|
| + |
2. POWER (hand or motor)
(one of these) |
|
24LA |
24" Lever Arm Assembly with ABS grip, bronze bushings |
$65
|
|
36LA |
36" Lever Arm Assembly with ABS grip, bronze bushings |
$85
|
|
105ME-GM-Assembly-7 |
12v DC, 60 rpm, 1/5hp bolt-on Motor Extension. Gear Motor powered using a DC power source, most commonly solar. |
$800
|
|
* Or optionally, motor AND hand-lever. Simple Pump offers the unique advantage that hand-lever and motor are interchangeable literally in minutes. You can have the reassurance that IF you were ever cut off by weather or other circumstances and - however unlikely - the motor blows a fuse at the same time, you can go back to hand operation in about five minutes. |
|
|
|
|
|
|
|
| + |
3. WELL CAP
(one of these) |
|
C2-Assembly |
2" well cap: with 1 3/4" split-flange port for the Simple Pump only. |
$65
|
|
C4-Assembly |
4" well cap with plugs and fasteners for black iron casing. Three ports: a 1 3/4" split-flange for the Simple Pump, a 1" for 220VAC supply and 1 3/4" submersible pressure exit. |
$75
|
|
|
C4.5-Assembly |
4.5" well cap with plugs and fasteners for PVC. Three ports: a 1 3/4" split-flange for the Simple Pump, a 1" for 220VAC supply and 1 3/4" submersible pressure exit. |
$75
|
|
|
C5-Assembly |
5" well cap. Three ports: a 1 3/4" split-flange for the Simple Pump, a 1" for 220VAC supply and 1 3/4" submersible pressure exit. |
$75
|
|
|
C6-Assembly |
6" well cap. Three ports: a 1 3/4" split-flange for the Simple Pump, a 1" for 220VAC supply and 1 3/4" submersible pressure exit. |
$85
|
|
|
C6-WTCC6S-Assy |
6" Trega WTCC-6S cast aluminum well cap. Certified, gasketed, watertight, vented, screened. Manufactured by Trega Corporation for Simple Pump Co. |
$95
|
|
|
C6.25-Assembly |
6.25" well cap. (6.25" ID x 6.9" OD for DR27.6 casings, often used in southeastern USA.)
Three ports: a 1 3/4" split-flange for the Simple Pump, a 1" for 220VAC supply and 1 3/4" submersible pressure exit. |
$90
|
|
|
C8-Assembly |
7"/8" well cap assembly. Three ports: a 1 3/4" split-flange port for the Simple Pump, a 1" port for 220VAC supply to a submersible and a 1 3/4" port for the submersible pressure line. |
$100
|
|
|
|
|
|
|
| + |
4. DROP PIPE Kits
(as appropriate for your well's specs) |
|
109DPTBE-KIT |
9 foot (bell end) top drop pipe kit with 1/16" weep at 48 inches, sucker rod and rod guide |
$40
|
|
109DPBE-KIT |
9 foot bell end drop pipe kit with rod guide and sucker rod. For use in all positions except top on 100 and 125 models. |
$40
|
|
109DPTBE-C |
9' top drop pipe kit with sucker rod and rod guide with weep hole drilled at custom depth |
$40
|
|
|
54DPT-Assembly |
54" Top Drop Pipe Kit with 54" X 1" schedule 80 PVC w/1 1/4" male end and 1" male end w/ 1/16" weep drilled 48" from top, 54" sucker rod with male/female SS ends, rod guide |
$35
|
|
|
54DP-Assembly |
54" Drop Pipe Kit with 54" X 1" schedule 80 PVC w/1" male/female ends, 54" sucker rod with male/female SS ends, rod guide |
$35
|
|
|
54DPB-Assembly |
54" Bottom Drop Pipe Kit with 54" X 1" schedule 80 PVC w/1 1/4" male end and 1" female end, 54" sucker rod with male/female SS ends, rod guide |
$35
|
|
|
27DPT-Assembly |
27" Top Drop Pipe Kit with 27" X 1" schedule 80 PVC w/1 1/4" male end and 1" male end w/ 1/16" weep drilled to specification, 27" sucker rod with male/female SS ends, rod guide |
$30
|
|
|
27DP-Assembly |
27" Drop Pipe Kit with 27" X 1" schedule 80 PVC w/1" male/female ends, 27" sucker rod with male/female SS ends, rod guide |
$30
|
|
|
27DPB-Assembly |
27" Bottom Drop Pipe Kit with 27" X 1" schedule 80 PVC w/1 1/4" male end and 1" female end, 27" sucker rod with male/female SS ends, rod guide |
$30
|
|
|
4DP-125 |
4" mini-coupler for 125. Schedule 80 PVC with 1 1/4" male top and bottom connectors. Used for cistern configurations. |
$25
|
|
|
|
|
|
|
| + |
5. PUMP CYLINDER
(one of these) |
|
100CA
125CA |
Model 100 3gpm Pump Cylinder Assembly: 1.375"
Model 125 5gpm Pump Cylinder Assembly: 1.75" |
$300
$335
|
|
|
|
|
|
|
Drop pipe threading machined to MNPT (male national pipe thread) and FNPT (female national pipe thread) standards.
