Simple Pump specifications.Materials of each part, plus other details.Pump Specs
TENCOM Polyester Fiberglass Rod Specifications
|
| Fiber type: | E-Glass |
| Resin type: | Polyester |
| Approximate fiber percentage: | 55% |
| Approximate resin percentage: | 45% |
| Tensile Strength: | 80,000 psi |
| Tensile Modulus: | 4.0x10^6 psi |
| Flexural Strength: | 80,000 psi |
| Flexural Modulus: | 4.0x10^6 psi |
| Compressive Strength: | 40,000 psi |
| Temperature range: | -45 to +240 degrees F |
| Barcol hardness: | 50 |
Available in 2", 4", 4.5", 5", 6", 6.25" and 7"/8" diameters. (Details here.)
Standard sucker rods are manufactured to a 108" length. Rods also available in 54" and 27" lengths.
Top drop pipe comes standard with a 1/16" diameter weep drilled into the sidewall of the PVC pipe, 48" below the top. For areas with deeper freezing levels, the weep hole will be drilled at any desired level at no charge. In no-frost installations, the weep hole can be deleted at no charge.
Motor can be powered by a solar panel, battery or other 12v or 24v DC source. Can pump from water levels down to 225'.
See also
Table of Features, and their benefits
Table of Flow capacities and pressures