Over 200 Simple Pumps have been installed in several Canadian solid waste landfills where the Simple Pump is pumping garbage water as part of methane recovery operations.
These pumps operate 24/7/365 and have been doing so for the past 2-1/2 years with minimal reliability issues. Most of these pumps are pumping from 65 feet using 12v DC Simple Pump motors powered by the sun.
Efficient
Simple Pump operates using common leverage principles. It provides a leverage ratio of 3.3:1. The unique lever arm pump only takes 12 lbs. of force to pump up to 5 gallons per minute from 100'. At 200 feet, it takes approximately 24 pounds of force per stroke.
Works smoothly even when installed at an angle and sustaining -27°C temperatures.
Simple Pump is an economical choice for desalinization, irrigation, and dewatering applications.
Use in Sampling
Convenient and easy to use. Simple Pump can be quickly moved from well to well, making periodic well sampling easy and fast. Simple Pump's small access diameter of 1.75" makes it ideal for environmental sampling/well monitoring applications. (Particular benefits for sampling applications.)
Configure Simple Pump™ to Your Use
12-volt Motor Extension: Motorized pump can be powered by a solar panel or battery. In this mode, Simple Pump™ can pump up to 2 gallons per minute at depths up to 200 feet.
Well caps: available in 2", 4", 5", 6" and 7"/8" diameters.
Sucker rods: Standard sucker rods are manufactured to a 108" length. Rods also available in 54", 27" and 4" lengths.
Drop pipe: Kit comes standard with a 1/16" diameter weep drilled into the sidewall of the PVC pipe, 48" below the top. In no-frost installations, the weep hole can be deleted at no charge.
Click photos to zoom... click again to close
Use the hand pump or motorized version to safely move contaminated water, highly impacted ground water, water containing trace elements and other debris.
